
Plumbing in Port Colborne, ON
Plumber in Port Colborne
Drain backing up or a pipe frozen? Start with what is safe to check, then a plumber explains the cause and gives you a written price.
- Written price first
- Licensed plumbers
- Port Colborne, Welland, Wainfleet and St. Catharines
Calm help with water problems
What should you do first when the water goes wrong?
If water is rising at the floor drain, stop running taps, the dishwasher and the washer, and keep clear of anything electrical near the water. If a pipe has burst, close the main shut-off where the water line enters the basement. Those two steps buy time to work out the rest.
Port Colborne Plumber works on the town's houses, from the vacation homes built from 1888 on Tennessee Avenue and the older homes of Humberstone to the newest subdivisions. About five days a year bring 25 mm of rain or more, enough to load the sewers and sump pumps, and about 121 days a year drop to freezing or below. We clear drains, look at sewer lines with a camera, and install sump pumps and backwater valves.
Work is performed by licensed plumbers (306A Certificate of Qualification). You get a written price before any part is fitted, and an honest answer on what can wait and what should not. The City is responsible for the pipe from the main to the property line, and you for the part from there to the house; we can show you where that split falls on your lot.
Describe the problem
Our commitments
What can you count on when you call?
Licensed and insured
Every plumber holds a current 306A Certificate of Qualification and is covered by liability insurance. Your home is protected on every job.
Every call is answered
Day or night, a person or our receptionist answers, takes the details and a plumber calls you back.
Written price before work starts
You see the number and approve it before any part is fitted. No surprises on the invoice.
1-year workmanship warranty
All labour comes backed by a one-year warranty. If a repair we made fails within the warranty period, we return and fix it at no additional labour cost.
From Tennessee Avenue to Westwood Estates
What pipe is in your house?
Port Colborne was built in waves, from the Gravelly Bay settlement of 1832 to subdivisions still going through approval. Each wave put different pipe under the lawn and behind the walls, and knowing which one you have usually tells the plumber where to look first.
Tennessee Avenue and Humberstone, before 1945
The vacation homes on Tennessee Avenue date from 1888 onward, and the former Village of Humberstone, merged with the town in 1952, holds much of the housing built before 1945.
These houses usually started with galvanized steel or lead water lines, cast iron drain stacks and a clay sewer lateral, with the basement floor drain running straight to the sewer and no sump pump. Low pressure usually means corroded pipe; a floor drain that backs up usually means roots or a broken joint in the clay. The technician runs a camera down the line and shows you where the City's part ends and yours begins. If your floor drain has backed up before, ask about a backflow device and the City grant before the next downpour: see sewer repair and backwater valves.
Barrick Road and Olga Drive, post-war
The houses along Barrick Road and the older subdivision lots around Olga Drive went up in the post-war years, filling the ground between the old town and the newest subdivisions.
Most have copper water lines, cast iron drains giving way to plastic, and a clay or fibre sewer lateral. The foundation weeping tile was often tied into the sanitary sewer, so in heavy rain groundwater and house drains share one pipe and the floor drain can back up. Roots in the lateral, pinhole leaks and rusted stacks are the other usual calls. The technician checks where the weeping tile goes and clears the lateral. If the floor drain backs up in a storm, keep water use low until it drains and ask for a camera look: see drain cleaning.
Westwood Estates, Mapleview and the newest subdivisions
Westwood Estates, Rosedale Estates, Mapleview and Millar's Crossing are the newest subdivisions, some still at the approval stage on the City's applications list.
These houses usually have plastic or copper water lines, plastic drains, a sump pump taking the foundation drainage and often a backwater valve on the sewer. The system works well as long as both parts keep working: the usual calls are a sump pump that stops in a storm or power cut, and a backwater valve that has never been cleaned. The technician tests the pump, checks the float and discharge, and opens the valve cover to look at the flap. Before the wet season, pour a bucket of water into the pit and watch the pump start and stop: see sump pumps.
Water where it should not be?
(365) 364-4366
Tell us what the water is doing. There are one or two safe things to do while you wait, and a plumber will talk you through the rest.
Call now- Before you callIf a drain is backing up, stop using water in the house; if a pipe has burst, turn the main shut-off clockwise until it stops.
- Written pricesYou approve the number before any part is fitted.
- Licensed plumbersWork is performed by licensed plumbers (306A Certificate of Qualification).
Plumbing services
What do you need help with?
Start with what you are seeing, and each page explains the likely cause, what is safe to do now and when it should not wait.

Sewer repair and backwater valves
A floor drain that backs up or roots in an old clay line. We look with a camera, show you which part of the line is yours and explain the City grant towards a backflow device.
Sewer repair and backwater valves
Emergency plumber
A backup in a heavy downpour or a pipe frozen in a cold snap. Shut the water off if you can; a person answers, takes the details and a plumber calls you back.
Emergency plumber
Sump pumps
Newer houses depend on a sump pump through storms and power cuts. We test the pump, check the float and discharge, and fit battery backup, ideally before the wet season starts.
Sump pumps
Drain cleaning
Slow sinks and tubs in older houses with cast iron and clay pipe. We clear the line, tell you why it blocked and say plainly when the cause is the sewer and not the sink.
Drain cleaning
Plumbing repairs
Leaks, toilets, taps and old pipe. We explain corroded galvanized lines and possible lead service lines, along with the City's grant for replacing the private line on your side of the property line.
Plumbing repairs
Water heaters
No hot water, a tank leaking at the base or water that never gets warm enough. We test before recommending repair or replacement, for tank and tankless, electric and gas.
Water heatersDrain slow or basement wet? Get a written price before any work starts.
Get a written quoteHow it works
How does a visit go?
- 1
Tell us what the water is doing
Call or use the form. A person takes the details and a plumber calls you back to talk through what is safe to do now.
- 2
Find the cause
The plumber looks at the fixture and the pipe, and where the sewer may be involved, at the line itself with a camera.
- 3
Approve a written price
You see the number before any part is fitted, along with an honest view of what can wait and what should not.
- 4
Fix it and explain it
The plumber does the work and tells you what caused the problem and what to watch for next time.

Areas we serve
Do we come to Port Colborne, Welland, Wainfleet and St. Catharines?
Beyond Port Colborne, we work in the nearby towns where the houses and the water systems are different again.
Besides Port Colborne itself, including Stevensville and Dain City, we work in Welland, including Crowland, Stop 19 and Welland South; in Wainfleet and Winger, where homes rely on wells, cisterns and septic systems; and in St. Catharines, from Port Dalhousie and Merritton to Grantham, Glenridge and Port Weller.
Guides
Want to read up before you call?
Plain answers on who owns which pipe, whether your house has a backwater valve and how to keep pipes from freezing.

Blocked drain or sewer: who is responsible in Port Colborne
Who pays to clear a blocked drain or sewer line in Port Colborne depends on where the blockage is and who owns that pipe. This guide covers the City's property-line split, what tenants and landlords are each responsible for, what drain cleaning involves and the City grants that help owners.
Read the guide
Does your home have a backwater valve? Finding it, insurance
How to tell whether your Port Colborne house has a backwater valve, where one belongs on the drain and why the weeping tile matters. Also covers the City grant and what to ask your insurer about sewer backup coverage.
Read the guide
Keeping pipes from freezing in a Port Colborne winter
How to protect your pipes through Port Colborne's long frost season, what to do first if one freezes or bursts, and how to find and test your main water shut-off before you need it.
Read the guide
Is water somewhere it should not be?
Tell us what you see, by phone or with the form. A plumber calls you back and gives you a written price before any work starts.
Questions
What do Port Colborne homeowners ask?
A pipe froze overnight in my Port Colborne house. What should I do first?
Open the tap on that line so water has somewhere to go as it thaws. If you see a split or water on the floor, shut the main valve first. Warm the pipe slowly with a hair dryer, or a space heater kept well back, and never with an open flame. Port Colborne averages about 121 days a year at or below 0 °C and about 23 below -10 °C, so lines along outside walls, in crawl spaces and in garages are the usual ones to freeze. Find and test your main shut-off before the next cold snap, then read How to keep pipes from freezing in a Port Colborne winter, and what to do if one does.
My house is in Humberstone or near Tennessee Avenue. Why do the drains keep blocking?
Port Colborne's oldest houses, from the Gravelly Bay settlement to the old Village of Humberstone, usually still have cast iron drain stacks and a clay sewer lateral under the lawn. Roots get into the clay joints, and cast iron scales up from the inside. If one sink is slow, the trouble is usually close to that sink. If the basement floor drain is the slow one, or several fixtures slow down together, the lateral is the more likely cause. Note which drains are slow and since when, and ask for a camera look at the line when you book drain cleaning.
Could my older Port Colborne house have a lead water line?
It could. Port Colborne's water is drawn from the Welland Canal, treated by Niagara Region and delivered by the City, and the City notes that many older private water lines may contain lead. Ontario's drinking water standard for lead is 0.010 milligrams per litre. Look at the pipe where it comes through the basement wall, before the meter. Lead is dull grey and soft enough to scratch shiny with a key, and a magnet will not stick to it. If that is what you see, ask the City about its private service line grant, then read about replacing your side of the line under plumbing repairs.
Which part of the sewer line does a Port Colborne homeowner own?
The City of Port Colborne looks after its sanitary sewer mains and the service from the main to the property line. Everything from the property line to your house, including the lateral under the lawn and the drains inside, is the owner's to maintain and repair. The water line is split at the same place. If a drain backs up, start inside: check whether one fixture or the whole house is affected before calling anyone. Who pays when a tenant is involved is covered in Who is responsible for a blocked drain or sewer line: tenant, landlord, homeowner or the City?
When does plumbing work on a Port Colborne house need a building permit?
Under Ontario's Building Code Act, 1992, installing, extending or materially altering or repairing plumbing generally needs a permit, so new fixtures and changes to drains usually do. The work must meet Part 7 of Ontario's Building Code, Ontario Regulation 163/24. Plumbing is a compulsory trade in Ontario: the person doing it must hold a Certificate of Qualification or a provisional certificate, or be a registered apprentice, and appear on the Skilled Trades Ontario Public Register. Work is performed by licensed plumbers (306A Certificate of Qualification). Before work that changes your drains, ask the City of Port Colborne building department whether a permit applies, and see plumbing repairs.
Who can install or service a gas water heater in Port Colborne?
In Ontario, fuel-fired appliances such as gas water heaters must be installed and serviced by a registered contractor using qualified gas technicians, under Ontario Regulation 212/01 (Gaseous Fuels). That covers replacing the heater, moving it and working on the gas line or venting. Gas work is performed by TSSA-certified gas technicians. If you smell gas near the heater, leave the house first and call your gas utility from outside. For anything else, such as no hot water or a leak at the base, note what the heater is doing and read about water heaters.
Why does the water from my taps look rusty in an older Port Colborne house?
Port Colborne's water arrives treated, so the colour usually comes from the pipe inside the house. Houses built before 1945 often started with galvanized steel water lines, which rust from the inside as they age. If only the hot water is brown, the water heater tank is the more likely cause. If the water is brown everywhere, including at the meter, there may be work on the City's main. Run the cold tap nearest the meter for a minute and compare it with a tap upstairs, then read about replacing corroded pipe under plumbing repairs.
What decides what a plumbing repair will cost?
Mostly what the problem turns out to be and how much of the pipe it involves. A blocked trap or a worn valve is a short job. A cracked clay lateral under the lawn means digging, a locate request and often a permit. The age of the house, how easy the pipe is to reach and the parts involved also count. The plumber looks first and explains what is wrong, and you see the price in writing and approve it before anything is fitted. Describe what the water is doing on the quote page.